Note:
Due to air transport restrictions, CDs are not available by default. Please download the software from the link below:
http://download.5yoa.com/NFCWSCM.zip

NFCSCM Introduction

Product Features
1) Support UID FUID CUID UFUID, Most of IC semi-encrypted card, IC full encryption card.
2) Has USB full speed interface
3) Two-color LED light prompt (red light is standby, green is working)
4) Built-in buzzer "beep" sound reminder

Product Parameters:
Dimensions: 108 (L) X 68 (W) X 12 mm (H)
Interface: USB full speed
Working Voltage: 5 V DC
Working current: 200mA
Standby current: 50mA
Normal current: 100mA
Working frequency: 13.56 MHz
Smart card support: UID FUID CUID UFUID, Most of IC Half-encryption, IC Full-encryption etc.
Supported operating systems: 98 Win, Win ME, Win 2000, Win XP, Win Vista, Win 7, Windows Server 2003, Windows Server 2008, Windows XP x64, Win Vista x64, Win 7x64, Win Server 2003x64, Win Server 2008x64, Win Server 2008 R2 x64, Windows CE 5.0, Windows 10

How to use the card reader?
1) Connect the device to your computer with the USB cable.
2) Download the software to use with the software: http://download.5yoa.com/NFCWSCM.zip

Read and write 13.56MHz IC, IC half encryption card, IC full encryption card
1. Place the card on the card reader and press 'Read' on the software to start decryption.
2. "√" indicates that the decryption was successful, and "X" indicates the failure.
3. After the decryption is successful, the software displays the card number.
4. Place a writable UID (13.56MHz writable chip) on the card reader and press "Write Type-A" on the software.

Note: encryption card is not 100% decode, it has successful rate, fail is also the normal result.

Light weight body, Mini Design
ABS flame-retardant material casing, small and light, the interior is controlled by high-quality microchip, and the card reading effect is fast.

Software Samples