For GM Series Supported Car Brands:

1. For Buick
2. For Chevrolet
3. For Cadillac
4. For GMC
5. For Alpheon
6. For Ravon
7. For Pontiac
8. For Saturn
9. For Hummer
10. For Oldsmobile
11. For Holden
12. For Daewoo Workhorse

1. Read Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Clear Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitor

3. Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data

4. I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.

8. On-Board Monitor Test:Retrieves and displays test results for emission-related Powertrain components and systems.

9. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

1. Oil Service Light Reset: Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.

2. Electronic Throttle Sensor Reset: To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.

3. Brake-pad Reset: To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.

4. SAS Reset: It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.

5. Injector Coding:After the ECU or injector is replaced, injector code of each cylinder must be
confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.

6. TPMS Reset:When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and  tire pressure sensor is damaged,The tire pressure
resetting function must be performed to reset tire pressure and turn off the tire pressure
MIL.

7. Gearbox Matching:This function can complete the gearbox self learning to improve gear shifting quality.

8. IMMO Service:To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

9. DPF Regeneration:It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.

10. Battery Matching: Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.

11. ABS Bleeding:When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

12. EGR Adaption:This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is clean or replaced.

13. Airbag Reset:This function resets the airbag data to clear the airbag collision fault indicator.

14. NOx Sensor Reset:If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

15. Seat Calibration:This function is applied to match the seats with memory function that are replaced and repaired.

16. Gear Learning:Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

And more functions: Windows Calibration,Sunroof Initialization,Suspension Matching,Language Change,Tire Type Reset,Engine Power Balance Monitoring, etc.

(Note: Available maintenance functions vary depending on the make, year, and model.These functions supported by the model are free and do not need to be purchased separately in the Mall)

Smart(Auto-Detect) Diagnosis

Adopts Auto-VIN technology that will automatically recognize vehicle information which you get the vehicle's make,model and year information more easily and then it will automatically generate a full system Health Report which you can quickly access all the electronic control units of vehicle and generate a detailed report about vehicle health

Multilingual Support

English,French,Spanish,German,Italian,Russian,Portuguese,Japanese,Korean,Traditional Chinese, Polish . All languages are free to use.

User’s Friendly Features

Feedback: If you have any vehicle issue that you can't figure out, you can submit the diagnostic feedback to us for analysis and troubleshooting; You can share the Diagnostic Report with others via Email; Diagnostic History can record the previous diagnostic data and provides quick access to the tested vehicles and users can choose to view the test report or resume from the last operation; With 3 data stream display modes available: figure/value/4 data stream in one graph; Screenshot: It can capture the current screen and you can view and manage all screenshots in the Image function.

DTC Library

Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.

Supports Full OBD II Protocols:

1. SAE J1850 PWM (41.6 Kbaud)
2. SAE J1850 VPW (10.4 Kbaud)
3. ISO 9141-2 (5 baud init, 10.4 Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)

Excellent Hardware

It has equipped with a set of reliable hardware: Android OS, 4-Core processor (1.3 GHz), 2.4GHz Wi-Fi,16GB storage, 4-inch LCD touch screen, and hotkey design that can give a better experience.

Lifetime Free Update

The LAUNCH Creader Elite Special Car Scanner provides you lifetime free update,you can update your diagnostic software and APK online to get the latest software version for extending more vehicle coverage on each model,and also can provides you the best service,functions and experience.

(NOTE:However, If you subscribe to any software from"MALL", the software can only be used for 12 months for free, and you need to renew it before the expiration date, otherwise you will not be able to use the software)

Technical Detailed

• Screen Size:4" Touch Screen
• Resolution:480*800 pixels
• CPU: 4-core 1.3GHz processor
• RAM: 1GB
• ROM: 16GB
• WiFi: 802.11b/g/n 2.4GHz
• USB: TYPE-C
• OBD II Input voltage range: 9~18V
• Power up via: DC 5V data cable or Diagnostic cable through connection to vehicle's DLC
• Working Temperature: -10℃ to 45℃ (14℉ to 113 ℉)
• Storage Temperature: -20℃ to 70℃ (-4℉ to 158 ℉)