NEW TONGOU Din Rail 2P 4P ATS Dual Power Automatic Transfer Switch Electrical Selector Switches Uninterrupted Power 63A

20%セーブ
East Supplier PlatformSKU: 1005006519180137-110V-2P 63A

価格:
$44.70 $55.88

税込み

在庫:
在庫あり (9996個), 出荷準備完了

説明

SPECIFICATIONS

Brand Name: TONGOU

Hign-concerned Chemical: None

Type: Mini

Origin: Mainland China

Rated Voltage: 220V

is_customized: Yes

Model Number: TOATS-2

Is Smart Device: no

Certification: CE

Product Name: Dual Power Automatic Transfer Switch

Coil Voltage: 110V OR 220V

Rated Current: 63A

Poles: 2P 4P

Rated Frequency: 50/60Hz

Function: Transfer 2 Power

Mounting: Din Rail Type

We are Factory: Accept OEM ODM

Switching Speed: <50 milliseconds

BEST ATS QUALITY IN ALIEXPRESS---SILVER CONTACT POINT & RED COPPER PARTS & STABLE RELAY CONTROL



City Power ⇆ Generator



General


TOATS-2 automatic transfer switch is a PC class infrequent change-over switch, with two-station design (commonly used for A and standby for B), suitable for AC systems with AC 50-60hz and rated current 6A-63A. The main function of the automatic transfer switch is when the main power (common power supply A) fails, the ATS will automatically switch to the backup power (Backup power supply B) to continue working (switching speed <50 milliseconds), which can effectively solve the troubles caused by power outages.


When both A and B have electricity, priority is using A Power


NOTE:


1. Manual/automatic operation can ensure the opening and closing performance of electrical operation, but in manual operation , there is no guarantee due to the different _opening/closing speeds of the operators. In manual operation, there's possible for excessive silver alloy loss . Therefore, the selector switch should only be pulled to the manual position after all power has been cut off for inspection and maintenance of the operating system and contact information.


2, Normally, pull the selector switch to the electric position. When manual operation is required, pull the selector switch to the manual position. After manual operation is complete, pull the selector switch from the manual position to the automatic position.

The control circuit TSE is immediately energized. After the change over is completed, the internal switch will damage the coil in the control circuit, and the coil can work normally at 85%-110% of the rated operating voltage. Too low input voltage may cause the coil to overheat and burn out.


Attention!When manual operation the mode selection switch must be in "manual" position

お支払いとセキュリティ

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

あなたも好きかも

最近見たもの