BIGTREETECH SKR V1.4 Turbo 32 Bit Motherboard Upgrade SKR V1.4 Control Board TMC2209 Driver For Ender3 CR10 3D Printer TFT35

Economisez 20%
East Supplier PlatformSKU: 4000480366542-SKR V1.4-With TMC2208X5-China

Color: SKR V1.4
Prix:
$67.02 $83.78

Taxes incluses

Stock:
938 en stock, prêts à être livrés

Description

SPECIFICATIONS

Brand Name: BIGTREETECH

Origin: Mainland China

Item Type: Motherboard

Model Number: SKR V1.4/SKR V1.4 Turbo

Appearance size: 110*85mm

Mounting Size: 102*76mm

Microprocessor: ARM Cortex-M3 CPU

Inputvoltage: DC12V-DC24V 5A-15A

logic voltage: DC3.3V

WIFl module: ESP-01S

Drive working mode support: SPI,UART,STEP/DIR

Motor driver interface: X,Y,Z,E0,E1,five(each has a reextendable interface),Up to 256 subdivisions Supporting file formats;G-code

Supported machine architecture: XYZ,delta,kossel,Ultimaker,corexy

Motor driver: Support TMC5161,TMC5160,TMC2209,TMC2225,TMC2208, TMC2130,ST820,LV8729,DRV8825,A4988,can be independently external motor drive

Display: "2.4/2.8/3.5"TFT,(SUPPORTS DUAL-MODESCREENS) LCD2004,LCD12864

Supporting file formats: G-CODE

Motor drive interface: X,Y,Z,E0,E1,five(each has a reextendable interface),Up to 256 subdivisions

SKR V1.4 Frequency: LPC1768-100MHZ

SKR V1.4 Turbo Frequency: LPC1769-120MHz

Fan interfaces: 1-way CNC fan,3-way Frequent fans

12C,SPl and WiFi interfaces to DlY: YES

The closed-loop drive interface: YES

Double Z-axis interface: YES

RGB light belt: YES

Support multifarious screen: YES

High performance MOSFET tube: YES

External connection power module: YES

Advantages1: Connect DCDC MODE V1.0 power module

Advantages2: RGB light bar

Advantages3: DIY

Advantages4: Thermistor interface

Advantages5: Dual Z-axis interface

Advantages6: More fan interfaces

Advantages7: Closed-loop drive interface

The gift of copper wire toothbrush is limited to the order delivered from the local warehouse in China. The number is limited. If you are not sure whether your order has gifts, please contact us to verify!


Integrated motherboard,Enrich expansion modulesStable,easy to use and previewable


Specification

Appearance size: 110*85mm
Mounting Size:102*76mm
Microprocessor: ARM Cortex-M3 CPU
Inputvoltage:DC12V-DC24V 5A-15A
logic voltage: DC3.3V
WIFl module: ESP-01S
Drive working mode support:SPI、UART、STEP/DIR
Motor driver interface: X,Y,Z,E0,E1,five(each has a reextendable interface),Up to 256 subdivisions Supporting file formats;G-code
Supported machine architecture:XYZ、delta、kossel、Ultimaker、corexy
 
Parameters
Motor driver:Support TMC5161,TMC5160,TMC2209,TMC2225,TMC2208, TMC2130,ST820,LV8729,DRV8825,A4988,can be independently external motor drive
 
Display: "2.4/2.8/3.5”TFT,(SUPPORTS DUAL-MODESCREENS) LCD2004,LCD12864
Supporting file formats:G-CODE
Motor drive interface:X,Y,Z,E0,E1,five(each has a reextendable interface),Up to 256 subdivisions
 
Functions
SKR V1.4
Frequency:LPC1768-100MHZ
SKR V1.4 Turbo
Frequency:LPC1769-120MHz
Fan interfaces:1-way CNC fan,3-way Frequent fans
12C,SPl and WiFi interfaces to DlY:YES
The closed-loop drive interface:YES
Double Z-axis interface:YES
RGB light belt:YES
Support multifarious screen:YES
High performance MOSFET tube:YES
External connection power module:YES
Advantages
Compared with BIGTREETECH SKR V1.3,the BIGTREETECH SKR V1.4 has the following upgrade and optimization
  • Connect DCDC MODE V1.0 power module:Reserved DCDC MODE V1.0 power module interface to supply power to TFT panel,BL touch and Neopixel
  • RGB light bar:RGB light bar supporting Neopixel scheme
  • DIY:Reserved 12C,SPl and WiFi interfaces to facilitate DiY(When use the WIFl module,you could use the BTT Writer for firmware flashing,serial port debugging and so on)
  • Thermistor interface:The thermistor interface shall be protected by a capacitor and a varistor to enhance the resistance of the interface
  • Dual Z-axis interface:Double Z-axis interface,eliminating the trouble of external drive expansion module
  • More fan interfaces:1-way CNC fan,3-way Frequent fans
  • Closed-loop drive interface:reserve the closed-loop drive interface to save the trouble of External Transfer module
 

NOTE

The DIY environment of each customer is different. In order to prevent the driver from being damaged, it is recommended to delete the comments of the following code when DIYing the firmware.

That is: // #define DISABLE_DRIVER_SAFE_POWER_PROTECT change to

#define DISABLE_DRIVER_SAFE_POWER_PROTECT

 
For more details about SKR V1.4/SKR V1.4 Turbo you can visit this website:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4


Paiement et sécurité

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

Tu pourrais aussi aimer

Vu récemment